FAUSTO
Fausto
(C)MASARE Team-Saoud007 (C)FullDump TM FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe Fausto Emulator compatibilities: *XML file to be compatible with Fausto Emulator MUST include cryptoworks Card (06) This used in internal by diablo cam emu If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator CardKey (06) added on Keys.bin has no effect under diablo cam emulator *Include Betacrypt Tuneled Nagra 2 Providers *Include ECM IV & ECM Seed under Irdeto2 Coding System CS Cards server supported: Newcamd (TCP) & EMM Support RadeGast (TCP) Camd35 (UDP cs357x) Camd35 (TCP cs378x) Camd33 (TCP) CS Client protocol supported: CCCam (TCP) tested with CCCam_2.1.1/CCCam_2.1.2 Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server Camd33 (TCP) tested with MPCS-0.9d card server Default LocalHost servers loaded auto Server type auto detected ECM Cache: ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time Apply under emulator/cards support/cards sharing Give possibilities to make home sharing with emulator/cards support/cards sharing How to synchronize wireless cams 1.Insert one cam 2.Run emulator 3.Optionally connect to server or to official card 4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache Version 1.39_B (04/09/2009) -Editor Fixed Keys.bin file creation Version 1.39 (04/09/2009) - Emulator Fixed problem with N3 prid, now ok with ecm & dcw *Monitor: popup menu options (mouse right clic) Under Auto Functions Added Auto Start Servers & Clients Added Auto Start Reader (phoenix mode), settings of reader stored on file Cards.ini (Freq & COM) Fixed Auto Load KEYS file Added Emulator On Startup -> if ticked emulator window loaded when Fausto application started Fixed CW, Tracker, Monitoring settings saved on FESettings.Ini *Clients: added CCcam support -Tab Manager Added CCCam server informations windows Option avalaible ONLY for CCCam line Double clic on CCCam client line to display server informations NOTA: if Client manager not running window will be empty Fausto Client CCCam.pdf file joined for details *Servers: added dvb pluggins support (can be shared too via server) Added Local popup menu under tab Manager (start, stop, remove single server) Modified ECM log Datas Modified Log File Datas *Season interface: -optimized event manager -Season Conax: accruate compatibilities now alphacrypt cam worked (Set Xsat=0 on season.ini) -Season settings file datas on section [Emulator] [CardClient] [OfficialCards] are now apply ONLY for season irdeto, others season emulation can retrieve provid auto Added Data Xsat on section [ConaxAtr] for explanations report to file Fausto & Season INI File.txt Delete existing Season.ini file to create a default one when Fausto emulator will be open (Xsat data will be added used with Season Conax Emulation) *Card support: irdeto card bug fix http://www.digital-eliteboard.com/sa...ad.php?p=11458 http://www.sat-universe.com/showthread.php?p=449384 |
5Ïðèêà÷åíî(è)
FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER
FAUSTO 1.39B Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe Fausto Emulator compatibilities: *XML file to be compatible with Fausto Emulator MUST include cryptoworks Card (06) This used in internal by diablo cam emu If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator CardKey (06) added on Keys.bin has no effect under diablo cam emulator *Include Betacrypt Tuneled Nagra 2 Providers *Include ECM IV & ECM Seed under Irdeto2 Coding System CS Cards server supported: Newcamd (TCP) & EMM Support RadeGast (TCP) Camd35 (UDP cs357x) Camd35 (TCP cs378x) Camd33 (TCP) CS Client protocol supported: CCCam (TCP) tested with CCCam_2.1.1/CCCam_2.1.2 Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server Camd33 (TCP) tested with MPCS-0.9d card server Default LocalHost servers loaded auto Server type auto detected ECM Cache: ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time Apply under emulator/cards support/cards sharing Give possibilities to make home sharing with emulator/cards support/cards sharing How to synchronize wireless cams 1.Insert one cam 2.Run emulator 3.Optionally connect to server or to official card 4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache Version 1.39_B (04/09/2009) -Editor Fixed Keys.bin file creation Version 1.39 (04/09/2009) - Emulator Fixed problem with N3 prid, now ok with ecm & dcw *Monitor: popup menu options (mouse right clic) Under Auto Functions Added Auto Start Servers & Clients Added Auto Start Reader (phoenix mode), settings of reader stored on file Cards.ini (Freq & COM) Fixed Auto Load KEYS file Added Emulator On Startup -> if ticked emulator window loaded when Fausto application started Fixed CW, Tracker, Monitoring settings saved on FESettings.Ini *Clients: added CCcam support -Tab Manager Added CCCam server informations windows Option avalaible ONLY for CCCam line Double clic on CCCam client line to display server informations NOTA: if Client manager not running window will be empty Fausto Client CCCam.pdf file joined for details *Servers: added dvb pluggins support (can be shared too via server) Added Local popup menu under tab Manager (start, stop, remove single server) Modified ECM log Datas Modified Log File Datas *Season interface: -optimized event manager -Season Conax: accruate compatibilities now alphacrypt cam worked (Set Xsat=0 on season.ini) -Season settings file datas on section [Emulator] [CardClient] [OfficialCards] are now apply ONLY for season irdeto, others season emulation can retrieve provid auto Added Data Xsat on section [ConaxAtr] for explanations report to file Fausto & Season INI File.txt Delete existing Season.ini file to create a default one when Fausto emulator will be open (Xsat data will be added used with Season Conax Emulation) *Card support: irdeto card bug fix *Extra -Joined Fausto Client CCCam.pdf -Updated/added text files on main folder Fausto -Joined Fausto Themes Pack3 (9 new themes) http://www.digital-eliteboard.com/sa...ad.php?p=11458 http://www.sat-universe.com/showthread.php?p=449384 |
5Ïðèêà÷åíî(è)
fausto
|
3Ïðèêà÷åíî(è)
fausto.
|
Fausto Version 1.43 is out
Fausto (C)MASARE Team-Saoud007 (C)FullDump TM Special thanks to s62,Snakie,Bordan,Rekordc & KarraKarra FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT/SERVER Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe Fausto Emulator compatibilities: *XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06) This keys used in internal by diablo cam emu If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator CardKey (06) added on Keys.bin has no effect under diablo cam emulator *Include Betacrypt Tuneled Nagra 2 Providers *Include ECM IV & ECM Seed keys under Irdeto2 Coding System CS Cards Client supported: CCCam (TCP) Newcamd (TCP) RadeGast (TCP) Camd35 (UDP cs357x) Camd35 (TCP cs378x) Camd33 (TCP) Gbox client (localhost only, default ports) Twin Protocol (Serial) CS Cards server supported: Newcamd (TCP) & EMM Support RadeGast (TCP) Camd35 (UDP cs357x) Camd35 (TCP cs378x) Camd33 (TCP) Support: - Ethernet (linux box, diablo wifi,...) - SSSP/HSIC/TM Share/CSC (Serial) - Season Interface (Cams/box Readers) - Diablo Wireless (base unit) Main Functions: - Emulator - Logger - Net client - Card server - Cards support - DVB Plugins (without pctv card) Version 1.43 (15/03/2010) - Editor[/color] Modele.xml modified - Emulator *Settings files: FeSettings.ini modified com parameters about season removed Season.ini added com paremeters for each emulation (Irdeto,Seca,Viaccess,Cryptoworks,Conax) To keep compatibilities with previous version FE use default settings Report To Fausto & Season INI File.txt for more details To create default settings file delete existing one, open emulator window and the new one will be created *Serial: - Added CSC ECM protocol support, 6 versions (Now avalaible SSSP/HSIC/TM Share/CSC ECM) Tested with version: * Titanium /technocam * Tiger t6 * Starsat * Dreamsky * GlobalStar * Technosat Added settings file for named CSC_Cas_Datas.cfg (folder ..\Fausto\Serial\) Settings file can be edited via tab SETUP Choose CSC_Cas_Datas.cfg on file list Press OPEN Made changes Press SAVE Usefull only if ECM not comes from box, it others case NOT required *Server: Newcamd: Irdeto EMM code improved Log File: can be produced without ECM Debug ON *Client: -Added possibility to set Connection Max delay Report to file FaustoClients Example.cfg dor syntax & example (Folder Fausto\Emu\CardClient) -Added Twin protocol For client definition report to FaustoClients Example.cfg on folder \Fausto\Emu\CardClient For more informations read file Fausto & Card Client.txt Joined file twin_cache.cfg (Folder Fausto\Emu\CardClient) with somes channels example, add your own -CCcam: Accruate compatibilities with Nagra3 provider (specially with card read by Newcs) Added default provider zeroed when only caid defined for a card -Log File: can be produced without ECM Debug ON *Cards: TNTSat Default AES key added if not set on Cards.ini file Sky Ita card fix *Setup: Added posibilities to edit file CSC_Cas_Datas.cfg twin_cache.cfg Include syntax definition *Language file: Added [Strings] datas Added Russian language file thanks to the author http://www.ysharing.com/es/file/866/...setup-zip.html http://www.ysharing.com/es/file/867/...setup-zip.html |
Âñè÷êè âðåìåíà ñà âúâ ôîðìàò GMT +3. ×àñúò å 11:40. |
DTV-BG Powered by vBulletin Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.