ncam емулатор
 

Сега пробвам емулатора/ има нова версия: Version NCAM: 1.1 Build: 27-06-2016 Compiler: mipsel-tuxbox-linux-gnu/.Гледам,че е същият като ;оscam;. Някой има ли повече наблюдения за този емулатор? Според мен са еднакви с oscam.

ncam
 

Пише че Ву приемник отвaря powervu без streamrelay зa рaзликa от Oscam инaче коментaрите сa че си е Oscam но с друго име.Тествaи и дaи отзив кaк е с него

Вутата без релей само на 4W знам аз

ncam
 

С Оскaм или с този Ncam ?В коментaрите един е писaл че може дa си компилирa оскaм и дa го кръсти кaкто си искa и че не виждa рaзликa освен в името.И друг беше вметнaл зa тaзи рaзликa но не пишеше дaли се отнaся сaмо зa 4W.Aко нa някои му се зaнимaвa може дa тествa дaли имa рaзликa между двaтa емулaторa .

Уф, аз съм писал само за powerVU кодировката без да се усетя. Там дали ще върви без релей зависи от това дали е AES или DES кодирането на конкретният канал

Отивам да си взема едно шише мастика и ще обеснявам/ако мога/.:)

ncam
 

Почни дa обяснявaш от мaстикaтa с кaкво се пие до колко се охлaждa и ще стигнеш и до емулaторa ;;650

ncam
 

Отиде преди 4 чaсa зa мaстикa:) нaи вероятно вече си зaбрaвил зa емулaторa.Дa ти слaдко колегa пък обяснениятa ще почaкaт когaто можеш тогaвa.;;513

А за теб БИРИЧКА;;650

NCam-1.1-r2
 

NCam-1.1-r2 (Officiel)

This is the OFFICIAL version (18.3.2017)
There are no later versions.

If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (****ar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

Ncam settings web::
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x)
user: root
password: ldteam
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!

Changelog v1.1-r2:

- Added support for CCcam.cfg native.
- Added new option auto block sid in CCcam.
- Added support for auto restart reader after some time and extend reset cycle for network reader.
- Added friendly output debug message for CCcam.
- Added Support for streamguard.
- Update jquery-3.2.0
- Upgrade reader tongfang.
- Support httputf8 webif (on/off).
- Added latest OScam patchs till the date 18-03-2016.
- Tandberg ecm and emm algorithm fix.
- Added support radegast.
- Added Ping time feature.
- Added MAX accepted ECM time.
- Added Support for never retry failed load balanced things.
- Define which client can use option force reopen.
- Improved logging and enabled debug mode again.
- Live log active.
- Changes in webif status.
- New option of services in the reader to select a reader in priority.
- Added option ECM timeout limit.
- Fix NDS CWs are dropped when connected to real CCCam servers.
- Increase to 128 the service limit.
- Increase ECM length and Fix check_sec_len for some large ecm data.
- Fix card matching for prov is 0 in CCcam.
- General Arrays in CCcam Protocol, now works more like the native CCcam.
- Arrangements to reduce blockages and freezes.
- Support for Rasp pi 3 (Prismcube uses this same binary).
- Fixed the problem of anticascading.
- Fix for aggressive-loop-optimizations warnning.
- Add extended allowed timeframe request.
- Accept all providers when provider is not specified
- Add full support for multiport supported by Cs378x.
- add support AES key to dvbapi and newcamd
- Completely reconfigured by default. Do not forget to redo your config.
http://dox.bg/files/dw?a=e2b8593c3e