EVO-UFS922_rev1303-HDD

[thunderstorm6]

EVOLUTION-ufs922-e2-HDD-1303-GoForIt



Code:

quick install:
1.
connect via ftp on orig ufs922 to folder ../media (maybe proftpd install needed first)

copy EVO-UFS922_rev1303-HDD.tar.gz to ../media

2.
telnet connect to ufs922:
cd /path/to/media

tar -xzvf EVO-UFS922_rev1303-HDD.tar.gz

cp /path/to/media/boot/uImage /mountpath/from/sda3

sync

3.
turn ufs922 off
connect comcable to ufs922
turn ufs922 on
break boot on "hit any key .....":

set bootargs "console=ttyAS0,115200 root=/dev/sda5 rw ip=ufs922-ip:server-ip:gateway-ip:255.255.255.0:kathrein:eth0ff mem=89m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=4 init=/bin/devinit"

set boote2 "run bootargs;ide reset;ext2load ide 0:3 a5000000 uImage;bootm a5000000"

boot

now you can test if boot is ok and you like e2 on ufs922.
if it's ok you can save your args by doing "3." again but before ... boot command do "saveenv".
this will save bootargs from ufs922.
if you like boot orig again it is very simple to set bootargs to orig from e2 by using "scriptexecutor"-12-setargs-orig !!

* ufs922-ip,server-ip,gateway-ip must be set to your own! if no server available use gateway-ip for this entry too!
http://upek.sputnik-sat.info/index.p...now=2009-08-02
http://www.sat-4-all.com/board/index...iew=getnewpost