Wi-Fi адаптор за ET 4000

[themaster301]

Ако , newcamd.list и newcamd.conf. са в различни папки , mgcam,a ще работи ли?

[дрим]

Първоначално написано от themaster301

Ако , newcamd.list и newcamd.conf. са в различни папки , mgcam,a ще работи ли?

Дори и да са в една папка, но не на правилното място, няма да работи!

[Чък Норис]

newcamd.conf няма общо с мгкамд и по подразбиране е в съвсем друга папка от /usr/****.

[themaster301]

Първоначално написано от дрим

Дори и да са в една папка, но не на правилното място, няма да работи!

Давам пример -> mg_cfg i newcamd.list са в папка usr/bin ,a newcamd.conf e в папка ect/tuxbox/confing. В такъв случаи ще работи ли mgcam'a?

edit: да се чете mg_ cfg и newcamd.list в папка usr/**** , а не usr/bin

[дрим]

Колега, нещо не мога да вникна в идеята ти.
Кажи какъв е приемника и по-точно с какъв имидж си, ако те интересува кой файл къде трябва да е?

[themaster301]

Първоначално написано от дрим

Колега, нещо не мога да вникна в идеята ти.
Кажи какъв е приемника и по-точно с какъв имидж си, ако те интересува кой файл къде трябва да е?

Този newcamd.conf. в коя папка трябва да е и каква му е функцията? Не трябва ли да е в папка заедно с newcamd.list?

# newcamd mandatory settings
#
# Use emulator?
EMU = yes
# if both control word server and emulator **** are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are betad UDS control word server
# connected to newcamd
AU = yes
#
# OSD
#
# number of seconds to show the newcamd OSD, works on enigma only
# 0 seconds -> OSD off
# 1 second -> show "Can't decode" messages only
OSD_TIMEOUT = 0
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or dreambox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = root:dreambox
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = yes
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = no
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual *** in keylist
DEFAULT_CW_DELAY = 0
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = yes
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
CA_INFO_FILE = /tmp/cainfo.txt
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des *** in hex> <lan/wan> <cardserver name> [noecm]
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# If the last word in the CWS line is noecm, newcamd will not attempt to send
# any ecms to that card, it will only send EMMs (AU) if userid is 1. Useful if
# you want to merge several cards of one provider into one port using
# cardspider.
#
# hostname = uds to use betad, port is the serial port in that case
#
# CWS = uds 1 dummy dummy
# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS = uds 0 local local
CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
# send keep alive messages to servers to keep connections from dying by
# unreasonable router NAT timeouts, make sure all cardservers/spiders you
# conntect to are v5.25 or newer, otherwise you'll loose connection to them,
# if set to yes
# seems this feature is commonly misunderstood, it only keeps connections
# open even if no data packets are using it for while (NAT routers tend to
# forget about established tcp connections when they are inactive), it is
# NOT to automatically reconnect to servers, see also Q&A in readme.txt
CWS_KEEPALIVE = no
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des ***>
#
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[Чък Норис]

Никаква функция няма, не се използва. Има възможност да се използва с cccam, но по подразбиране е забранен. Директорията му е точно там където си го намерил /etc/tuxbox/config, ако толкова ти се набива на очи може да го изтриеш, нищо няма да промениш.

[Patriarha]

Първоначално написано от пешето

Ето с това cfg на същият тренд с 1.38 от плъгините на ПЛИ работи без проблем.
П.С. Само махни txt в края на файла.

Хиляди благодарности и от мен!След три дни без сън, четене на стотици постове, десетки проби, шест префлашвания....за пет минути всичко лети. Да си жив и здрав!

[Дезео]

Здравейте, пробвам нов Wi-Fi стик на тренда с чипсет RT 5370;
Според няколко чужди форума, включително и OpenPli, би трябвало този чипсет да се поддържа от OpenPli 4.0, но аз нещо не мога да го подкарам.
След поставяне на стика и рестарт на приемника опцията Wlan липсва в менюто и мога да се свържа само чрез лан кабела. Някой може ли да даде идеи как може да се реши проблема. Ето и малко допълнителна информция:

dmesg

Linux version 3.8.7 (build@buildserver) (gcc version 4.8.2 (GCC) ) #1 Mon Apr 14 03:27:08 CEST 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e8a6000@0x0075a000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 80705ba0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65024 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table ent
ries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
__ex_table already sorted, skipping sort
Memory: 235940k/262144k available (5781k kernel code, 26204k reserved, 1407k data, 228k init, 0k highmem)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.518 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 499.71 BogoMIPS (lpj=249856)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver *** type
*** type id_resolver registered
Ke
y type id_legacy registered
fuse init (API version 7.20)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
*** type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, O
OB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4

Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high-speed USB device number 3 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 774595340
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3589151B-E1F2-44B7-8693-30FDE749A24A, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 228k freed
Algorithmics/MIPS FPU Emulator v1.5
usb 1-1.2: new full-speed USB device number 4 using ehci-brcm
usb 1-2: new high-speed USB d
evice number 5 using ehci-brcm
scsi0 : usb-storage 1-2:1.0
scsi 0:0:0:0: Direct-Access     Seagate  Expansion Desk   0737 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] Spinning up disk...
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbcore: registered new interface driver tpm
.ready
sd 0:0:0:0: [sda] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB)
 sda: sda1
sda: p1 size 31256233216 extends beyond EOD, enabling native capacity
sd 0:0:0:0: [sda] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB)
 sda: sda1
sda: p1 size 31256233216 extends beyond EOD, truncated
sd 0:0:0:0: [sda] 488378645 4096-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Attached SCSI disk
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Creating 1 devices ...
Adding 118080k swap on /dev/zram0.  Priority:-1 extents:1 across:118080k SS
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

lsusb

Bus 001 Device 002: ID 1a40:0101
Bus 001 Device 005: ID 0bc2:3312
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 003: ID 148f:7601
Bus 001 Device 004: ID dead:beef

[дрим]

Влезни в плъгини в драйвери и виж дали имаш драйвер за инсталиране.